WARMUS Double Heat Emission Plate 1000 X 385MM 16 & 20mm Pipe

Description

WARMUS Double Heat Emission Plate – 1000 x 385mm for 16mm or 20mm Pipe

The WARMUS Double Heat Emission Plate is designed to improve heat transfer in wet underfloor heating systems installed in suspended timber and compatible floating-floor constructions.

Manufactured from aluminium, the plate conducts heat away from the underfloor heating pipe and distributes it across a larger area beneath the finished floor. This helps create a more uniform floor surface temperature and improves heat transfer into the room.

Each plate features two preformed pipe channels at 200mm centres. Separate options are available for 16mm and 20mm underfloor heating pipe, so the correct plate size must be selected to match the pipe being installed.

Key Features

• - Aluminium heat emission plate for wet underfloor heating
• - Suitable for suspended timber and compatible floating floor systems
• - Available for either 16mm or 20mm pipe
• - Two preformed channels at 200mm pipe centres
• - Helps distribute heat evenly across the floor
•  Supports effective heat transfer from the pipework
• - Plate dimensions: 1000mm x 385mm
• - Approximately 32 plates specified per 15m²
• - Supplied individually

Selecting the Correct Plate

Choose the 16mm or 20mm option based on the outer diameter of your underfloor heating pipe. The plate channel must fit the pipe correctly to provide secure retention and effective heat transfer.

Installation Information

Install the plates in accordance with the designed pipe layout, ensuring they are correctly supported and in close contact with the floor construction above. Press the pipe carefully into the preformed channels without damaging or distorting it.

Suitable insulation should be fitted beneath the plates and pipework to reduce downward heat loss and direct more heat towards the occupied space. Plate quantities are indicative and may vary depending on the room dimensions, joist layout, and system design.